HOW TO APPLY OUR PRODUCTS
HOW TO PREPARE YOUR SURFACES
Our products need a clean slate to work with! Whether you’re sprucing up a wood, metal, or plastic surface, follow these steps.
Start by making sure that your workspace is well-ventilated. Use appropriate protective gear, including gloves, glasses, and a mask.
Clear any loose debris and dirt from your truck bed (or other surface).
Use a degreaser or warm soapy water to wash the application area. Allow it to dry.
Sand the area to ensure a consistent, smooth surface and help the product stick.
Cover any surrounding areas that you don’t want to apply product to with paper or plastic sheeting.
While no primer is needed, for best results we recommend using your favorite primer. For plastic or areas that are difficult to sand, apply an adhesion promoter.
SEE HOW OUR NEW AEROSOL SPRAYS WORK TO PROTECT THE SURFACES OF YOUR TRUCK.
ALWAYS USE PROTECTIVE GEAR TO APPLY OUR PRODUCTS
HOW TO APPLY ONE-PART TRUCK BED LINER
OPEN THE BED LINER
COATING CAN
Mix thoroughly with a paint mix stick.
Carefully pour into the Gorilla Roller & Tray Kit.
Once finished, make sure the lid is securely sealed.
Be sure to rinse and clean application tools thoroughly.
APPLY THE BED LINER COATING
APPLY WITH OUR
ROLLER & TRAY KIT
Pour the truck bed coating into the roller tray.
Dip your roller into the tray, rotate the roller to saturate, and tap the roller to avoid applying excess product.
Starting at the top of your truck bed, evenly roll the bed liner on the prepared surface.
Once you’ve covered the entire surface, allow the first coat to dry for at least 30-60 minutes.
Once 30-60 minutes have passed, repeat steps 2-3 to apply the second coat.
Allow the surface to cure for 24-48 hours before light use and 3-5 days before heavy use.
ALWAYS USE PROTECTIVE GEAR TO APPLY OUR PRODUCTS
HOW TO APPLY GORILLA AEROSOL PRODUCTS
HOW TO USE OUR
AEROSOL PRODUCTS
Whether you’ve got our Tough Undercoating or our handy Truck Bed Coating aerosol spray, using them is as easy as can be.
Shake the can for at least 2 minutes.
If using the Truck Bed Coating aerosol, hold the can 12” away from the surface. If you’re using the Tough Undercoating, hold the can 10” away from the surface.
Use a sweeping motion to give the area a light first coat.
Wait 10-15 minutes.
Repeat steps 2-3 to apply a second coat.
Allow the surface to cure for 3-4 hours before use.
ALWAYS USE PROTECTIVE GEAR TO APPLY OUR PRODUCTS
SEE HOW OUR NEW AEROSOL SPRAYS WORK TO PROTECT THE SURFACES OF YOUR TRUCK.
